Drive Shaft Assembly - California Trimmer Mower Maintenance Manual

Heavy Duty & Commercial

Drive Shaft Assembly

Tools Required:
5/32" Allen Wrench
1
1 Needle Nose Pliers
1/2" Wrenches
2
Secure the drive shaft, either by inserting the short end of the drive shaft into a hole in your work bench or
secure in a vice. Take care not to dent or mar the surface of the drive shaft.
Step 1
Make sure the drive shaft clutch plate is clean and dry.
The clutch lining has a solid black rubber side and a belted side.
Step 2
Place the lining with the solid black rubber side facing down, on the clutch plate of the drive shaft, and the
belted side facing up.
1 Bearing Setting Tool
1 Hammer
1 Spring Compression Tool
California Trimmer Mower
Maintenance Manual
34