Changing The Door Hinging - Miele FN 11827 S Operating And Installation Instructions

The appliance is supplied with left-hand
door hinging. If right-hand door hinging
is required, the hinging must be
changed.
To change the door hinging, you will
need the following tools:
– a Phillips head screwdriver,
– a flat-bladed screwdriver,
– a selection of Torx screwdrivers,
– a spanner.
Two people are needed to change
the door hinging.
Removing the door handle
^ Pull door handle a towards you. Side
section b slides back.
^ Pull side section b firmly back out of
the guides on the mounting plate
(see arrow).
^ Undo the 4 (Torx 15) screws in the
mounting plate, and remove the
handle.
^ Remove the cover caps from the
opposite side, and fit them into the
empty holes.

Changing the door hinging

39