Playing Back From Optional Components - Onkyo SBX-200 Instruction Manual

NOTE
If there is no sound output even after the paring is done successfully,
consult the user manual of the Bluetooth-enabled device, and then
select the "SBX-200" as the audio output device.
CAUTION
iPod may not output the sound when you press INPUT to
change the mode to iPod mode while iPod, already placed on
the Docking Tray, is connected to Bluetooth. (The White source
indicator turns on.)
In such case, boot the music application on iPod, touch the
on the screen, and select "Dock Connector" to output the sound
properly.

Playing Back from Optional Components

You can enjoy the sound from an optional component such as a
portable music player through the speakers of this unit. Be sure
to turn off the power of each component before making any
connections. For details, refer to the instruction manual of the
component to be connected.
1
Connect the LINE IN jack on the side of the unit to the
line output jack of an external component using an audio
mark
connecting cable (not supplied).
2
Turn the connected component on.
3
Press " " button to turn on the unit.
4
Press INPUT button repeatedly to switch LINE IN mode. The
sound from the connected component is output from the
speakers of this unit.
 The source indicator turns to Green. 
To audio output
such as portable
music player.
13
En-