Advertisement
INFORMATION FOR YOUR SAFETY!
THE FCC REGULATION WARNING
(for USA)
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
Unauthorized changes or modification to this
system can void the user's authority to operate
this equipment.
CAUTION
The normal function of the product may
be disturbed by Strong Electro
Magnetic Interference. If so, simply
reset the product to resume normal
operation by following the owner's
manual. In case the function could not
resume, please use the product in
other location.
2
aw_AP40(ERP)_Manual_G04_130626
2013
6
26
17:51:42
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE
PROCEEDING
Please keep this manual in a safe place for
future reference.
Power Supply
Please connect the designated power cord to
an AC outlet of the correct voltage.
Do not connect it to an AC outlet of voltage
other than that for which your instrument is
intended.
Unplug the power cord when not using the
instrument, or during electrical storms.
Connections
Before connecting the instrument to other
devices, turn off the power to all units. This
will help prevent malfunction and / or damage
to other devices.
Location
Do not expose the instrument to the following
conditions to avoid deformation, discoloration,
or more serious damage:
Direct sunlight
Extreme temperature or humidity
Excessive dusty or dirty location
Strong vibrations or shocks
Close to magnetic fields
Interference with other electrical devices
Radios and televisions placed nearby may
experience reception interference. Operate
this unit at a suitable distance from radios and
televisions.
Cleaning
Clean only with a soft, dry cloth.
Do not use paint thinners, solvents, cleaning
fluids, or chemical-impregnated wiping cloths.
Handling
Do not apply excessive force to the switches
or controls.
Do not let paper, metallic, or other objects into
the instrument. If this happens, unplug the
power cord from the wall outlet. Then have
the instrument inspected by qualified service
personnel.
Disconnect all cables before moving the
instrument.
100
95
75
25
5
0
Advertisement
