2N NetSpeaker Manual page 4

Launch the
Launch the
the server.
Having installed the
®
2N NetSpeaker Connection and Playing
Set your
figures below.
1) Connect the speakers to the network and switch on power. You can find the HW
manual
2) Launch the ControlPanel (default login data: name:Admin, without password).
3) Connected NetSpeakers are shown in tab
create the Zone structure. In specific network settings NetSpeakers are not shown in
this tab and further settings are necessary which can take place in
NetSpeaker Scanner settings .
®
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2N NetSpeaker Server
®
2N NetSpeaker
®
2N NetSpeaker Server
Figure: 2N® NetSpeaker system in network environment
®
2N NetSpeaker system and prepare playing following the instructions and
here .
installer on the PC used as the server.
ControlPanel installer on the PC used for control of
, you will be invited to restart the PC.
Destinations & Zones where you can
Administartor ->
4