Table of Contents
Advertisement
3. Press right menu key
4. Press up /down
confirm.
5. Press up /down
played while you switch to each ring tone.
6. Press right menu key
7. Press down key
Press right menu key
8. Press end key
Keypad Lock
1. In the standby mode, long press *
keypad lock. The lock symbol
display.
2. Long press *
Handset R Key Function – Redial or Recall
1. In standby mode the R button is for last number redial: press R key, the last
dialed phone number will displayed.
2. During an external call the R key is the Recall function, also known as Flash and
used for network services or when connected to a PBX extension. (You have to
contact your local phone service provider to activate this function.)
BASE STATION SETTINGS
Restoring Base to Factory Default
1. Press right menu key
2. Press up /down
3. Press right menu key
4. Press up /down
5. Press right menu key
6. Press key number 1 to confirm, or key number 2 to abort.
7. Press end key
Call Waiting Tone
When there is an incoming call from an external line during a call in progress, the
base will send a series of short beeps to the handsets in use. Use this function to turn
the call waiting tone on or off.
1. Press right menu key
2. Press up /down
3. Press right menu key
4. Press up /down
5. Press right menu key
to confirm. Register HS is displayed.
key to select Melody INT. Press right menu key
key to select among 10 melodies. A short melody will be
to confirm. Volume is displayed.
to reduce the volume, or up key
to confirm.
to exit.
for 3 seconds or more to re-activate the keypad.
to enter the menu.
key to select Base Setting.
to confirm.
key to select Reset Base.
to confirm.
to exit.
to enter the menu.
key to select Base Setting.
to confirm.
key to select Call Waiting.
to confirm. OFF will be displayed, indicating the call
for 3 seconds or more to activate the
will be displayed in the right corner of the LCD
16
to increase the volume.
to
Advertisement
Table of Contents
