Related Manuals for Blue Tiger BT PRO
Summary of Contents for Blue Tiger BT PRO
- Page 2 Please double check the contents of your package to verify that you have received all of the included items. Please read the user guide in its entirety before operating your headset. Your Blue Tiger headset can be paired with any device that is Bluetooth enabled.
- Page 3 Getting Started – Battery Care Please fully charge your new headset before attempting to pair your headset for the first time. Your headset should be charged for a minimum of four hours and no more than eight hours to achieve a full charge. The LED will remain solid red while charging, and will turn off when fully charged.
-
Page 5: Specifications
Specifications Bluetooth Type V 2.1, Class 2 Frequency Band 2.4GHz-2.8435GHz, ISM Band Talk/Standby Time 20 hours/350 hours Data Encryption 128 bit Battery Type High Capacity Li-Polymer Charging Type Weight 75g (includes battery) Size 150*140*65mm... - Page 6 FIRST TIME USAGE INSTRUCTIONS Adjusting the Headband: We recommend that you extend the headband slightly on both sides to reduce tension and increase the headband’s flexibility. Pairing the Headset: Before your headset can be used with your phone, it must first be connected, or paired, to...
- Page 7 Instructions for Single Device Pairing: 1. Make sure that your Blue Tiger headset is in the "Off" position (no light flashing on the side of the headset), press and hold the MFB for about 10 seconds, until the...
- Page 8 2. On your phone or other Bluetooth device, go to your Bluetooth menu (sometimes located under Settings, Wireless, Connectivity, or another submenu), and select "Add New" or "Search for New Devices." 3. On your phone or other Bluetooth device, select your headset on the list.
- Page 9 Having Trouble?: If your phone does not “see” your headset, check to make sure the LED light on the headset is flashing blue and red. Once you have verified that it is flashing and your phone is not recognizing the headset, try rebooting your phone and attempt pairing again.
- Page 10 2. Turn the Bluetooth function off on the first phone. 3. Turn the headset off and then pair the headset with the second phone. 4. Turn the Bluetooth function back on the first phone. At this time, both phones should be paired with the headset.
- Page 11 General Functions Turn On: Press and hold the MFB button for 5 seconds until the indicator light flashes blue 3 times. NOTE: For the first 5 cycles of turning on the headset, the headset will beep twice, flash blue 5 times, and then two more times.
- Page 12 Turn Off: Press and hold the MFB for 5 seconds. The headset will beep three times and then the indicator light will flash red three times. Voice Dialing: Press and hold the MFB for about one second. Your phone should then activate its voice dialing function.
- Page 13 Redialing: Press the MFB twice quickly. Answering/Ending a Call: Press the MFB once. Mute On/Off: Press and hold the Down Volume (-) button for 2-3 seconds. NOTE: Some functions may or may not work with certain phone models. See your phone’s manual for more information.
- Page 14 Bluetooth Tips Most Bluetooth headsets, including Blue Tiger headsets, have a range of about 10 meters (about 30 feet). However, there are factors that can increase or decrease your range and signal strength. Like most radio transmissions, line of sight plays an important role.
- Page 15 mark. On the other hand, if you do not have good line of sight or have something like a wall between the headset and phone, you may only get a few feet of range. Additionally, other factors may interfere with Bluetooth signal transmission.
- Page 16 this is to remove your phone or other Bluetooth device from contact or close proximity to the source of the interference. Troubleshooting Tips *Ensure that your headset has enough power, is turned on, and has been successfully paired with your device. (Follow the pairing instructions located in this manual)
- Page 17 *If you are having trouble getting the headset paired, try rebooting your phone. *Ensure that you have enabled your Bluetooth function on your phone or device. *Be sure that you are within 10 meters (about 30 feet) of your phone or Bluetooth enabled device with good line of sight and with no other electromagnetic interferences obstructing your wireless link.
- Page 18 *If indicator light goes off during charging, do not be alarmed, headset is still receiving a charge. Headset Storage *Only use included accessories with your Blue Tiger Pro. Using unauthorized chargers could damage your battery. *Store headset away from dust, heat, and water.
- Page 19 *Do not store headset or chargers in extreme environments. Additional Support If you have any other questions or for information about your headset warranty, please contact our Customer Service department at 1-800-935-1165, see our technical support page on our website, bluetigerusa.com/technical- support.
Need help?
Do you have a question about the BT PRO and is the answer not in the manual?
Questions and answers