Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Blue Tiger Advantage PLUS
Summary of Contents for Blue Tiger Advantage PLUS
- Page 1 Blue Tiger Advantage PLUS User Manual bluetigerusa.com...
-
Page 2: Table Of Contents
Answer Call End Call Ignore Incoming Call (1st or 2nd call) Answer 2nd Incoming Call Custom User Functions Changing Language Turning the Blue Tiger LED On/Off Microphone Mute Voice Activation Understanding LED Lights and Tones Position the Boom Adjust Headband Mic Boom Tension &... -
Page 3: Thank You
PLEASE READ THIS REFERENCE MANUAL Please take the time to follow the instructions in this reference guide carefully. It will help you set up and operate your Advantage PLUS Headset properly and enjoy its advanced features. Please save this guide for future assistance. -
Page 4: Charge The Battery
Solid Blue LED indicates headset is fully charged. CONNECTING HEADSET TO DEVICE To use the Advantage PLUS Headset with a Bluetooth Device, such as a smartphone or laptop computer, you must first establish a wireless connection between the Headset and the intended device. -
Page 5: Phone Calls
Once successfully paired, you will hear “Device Connected” and the LED will flash blue, once every two seconds indicating the Headset and Bluetooth Device are connected. The Headset may be paired to a new Bluetooth Device using the above procedure. Note that this will undo the pairing to the current Bluetooth Device. -
Page 6: Custom User Functions
German, and Spanish. Each successive button press will cycle to the next language. Turning the Blue Tiger LED On/Off The Blue Tiger LED can be turned off by pressing Vol+ and Vol- simultaneously for 5 seconds. This function can only be activated in standby or connected mode. -
Page 7: Understanding Led Lights And Tones
Automatic No LED Output “Device Connected” Pairing Failure Automatic No LED Output “Pairing Incomplete” “Blue Tiger Power On/Off Press MFB for 2.5 seconds Blue/Red Flash 3 Times Activated”, “Blue Tiger Off” Press Volume + or Volume - to < Increase Volume... -
Page 8: Position The Boom
• Position the ear cushion in the center of the ear. Looser Fit • Position the T-Pad above the ear, half way between the top of the ear and the top of the head. 8 | Blue Tiger Advantage PLUS User Manual v1.2... -
Page 9: Mic Boom Tension & Headband Disassembly
1. Loosen the Headband Set Screw (counterclockwise) or tighten (clockwise) to loosen or tighten the boom position up or down. It is not necessary to disassemble your Advantage PLUS Headset. However, if the headband were to become separated from the mic boom, simply reattach it as shown and tighten the Set Screw. -
Page 10: Microphone Orientation
2. The Ear Cushion snaps on to the headband assembly. Unsnap the cushion from the headband to replace or interchange between the foam or leather cushions (both included). MICROPHONE ORIENTATION Talk Side Speech Recognition Microphone Talk Indicator Noise Cancellation Side NFC Tag Noise Cancellation Microphone 10 | Blue Tiger Advantage PLUS User Manual v1.2... -
Page 11: Patents
According to the Occupational Safety and Health Administration (OSHA), listening to volume levels over 100 dB for more than two hours at a time can lead to hearing loss. *Your Advantage PLUS headset has the capability to reach a colume level that exceeds 100 dB. **Please exercise caution. -
Page 12: Troubleshooting
For Touch-to-Pair, initiate Standard Bluetooth Paring before touching the NFC Does not Pair Headset NFC tag to the NFC tag of the Bluetooth Device. The Headset NFC Tag is located in Microphone Assembly. 12 | Blue Tiger Advantage PLUS User Manual v1.2... -
Page 14: Safety And Regulatory Information
Be aware of how these sounds Netherlands, Norway, Poland, Portugal, may vary in character so you can recognize Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. them as needed. 14 | Blue Tiger Advantage PLUS User Manual v1.2...
Need help?
Do you have a question about the Advantage PLUS and is the answer not in the manual?
Questions and answers