ARS-2160/ARS-2320 Manual
Chapter 3 Hardware Installation
3.1 Install a 2.5'' HDD
The hard drive installation procedures for ARS-2160 / ARS-2320 are the same.
Here we simply take ARS-2160 to demonstrate.
1. Remove the 4 screws of ARS-2160 and open the upper cover.
2. Slide the 2.5'' SATA hard drive along the sides of ARS-2160 till it connects CN16.
3. Fix the SATA hard drive to the two sides of ARS-2160 with the enclosed 4 screws.
4. Return the upper cover of the bridge and fix with the 4 screws.
5. Set the jumper, and connect CN6 of ARS-2160 to the host SCA2 80-pin connector.
8