Advertisement
Quick Links
Quick Installation Guide of ARS-2160/ARS-2320 v1.3
Section 1 Introduction
1.1 Overview
ARS-2160/ARS-2320 is a SCSI-to-SATA II bridge. Through its connection to a SCSI host 68-pin
connector the bridge can turn a 2.5'' hard drive into one with LVD SCSI efficiency. Thus, you can
enjoy the high performance of SCSI.
1.2 Specification
Temperature:
Operation:
0°C to 70°C / Storage: -40°C to 85°C
Humidity: 15% to 90%
Size: 14.6 cm(L) x 10.1 cm (W) x 2.5cm (H)
1.3 Connectors
CN2: 68-pin SCSI connector
CN17: 4-pin power connector
CN16: SATA II integrated connector
CN3: reserved
CN4: reserved
J1: jumper
Section 2 Jumper Setting
The jumper (J1) is used to set functions.
Reserved
CN2
CN17
Pin 1
Pin 1
1
2
SCSI ID
4
8
DELAY START
WRITE PROTECT
PARITY DISABLE
FORCE SINGLE ENDED
LED +5V
GND
LED ─
Pin 20
J1
CN3
CN4
CN16
Advertisement
Related Manuals for Acard ARS-2160
Summary of Contents for Acard ARS-2160
- Page 1 Section 1 Introduction 1.1 Overview ARS-2160/ARS-2320 is a SCSI-to-SATA II bridge. Through its connection to a SCSI host 68-pin connector the bridge can turn a 2.5'' hard drive into one with LVD SCSI efficiency. Thus, you can enjoy the high performance of SCSI.
- Page 2 2. Slide the 2.5'' SATA hard drive along the sides of ARS-2160 till it connects CN16. 3. Fix the SATA hard drive to the two sides of ARS-2160 with the enclosed 4 screws. 4. Return the upper cover of the bridge and fix with the 4 screws.