Advertisement
In any QFlex product the bottom unit will incorporate all the external user connectivity for a column (Shown below).
The connectors are located towards the bottom of the rear panel and will not be visible when installation is complete.
Connections are accessed by the removal of an access plate which will require the use of a Philips screwdriver.
There is no mains power switch. An external fused and switched mains spur will be required.
There is no user accessible mains fuse.
There are two balanced analog audio inputs labeled A and B.
Analog inputs A and B are on a 6 way phoenix (pluggable terminal block) connector.
Analog link outputs A and B are on a 6 way phoenix (pluggable terminal block) connector.
The analog input and link signals are connected directly in parallel.
Advertisement
