Using Your Hd Radio Tabletop - Insignia NS-HDRAD User Manual

NS-HDRAD_14-1417_MAN_V4_ENG.fm Page 9 Friday, December 12, 2014 12:13 PM
NS-HDRAD HD Radio™ Tabletop
Connecting the AC adapter
To connect the AC adapter:
1 Plug the small connector at the end of the power cord into the DC IN
jack on the back of your radio.
2 Plug the AC adapter into a 120/240V, 50/60Hz power outlet.

Using your HD Radio Tabletop

Turning on your radio
To turn on your radio:
• Press
Selecting the mode (source)
To select the mode (sound source):
• Press SOURCE repeatedly on the front of your radio to toggle
between Tuner and AUX. The source you select appears on the display.
Volume control
After you select the mode you want, press VOLUME+ or – to set the
volume to a comfortable level.
Using Tuner mode
Tuner mode is the default mode on your radio and is selected when you
turn your radio on.
To tune to a station:
1 Press the TUNING+/– buttons on the front of your radio momentarily
to tune to FM radio up or down. Press and hold the buttons for more
than one second to search for the next or previous station.
2 Press PRESET+/– on the front of your radio to go to the next higher
or lower preset station.
Storing preset stations in memory
Your HD Radio Tabletop can store 20 FM stations in memory. When you
store a station in memory, you can tune to the stored (preset) station by
repeatedly pressing PRESET+ or PRESET– on the front of your radio.
To store stations in memory:
1 Press SOURCE on the top of your radio to select Tuner mode.
2 Press the TUNING+/– buttons on the front of your radio to tune to the
station you want to store.
(power) on the front of your radio.
www.insigniaproducts.com 9