3.6 Driving instructions
The auxiliary engine works as follows:
When the pedals are activated a sensor sends a signal to the elec-
tronic steering (controller) which then starts the motor.
The power of the auxiliary engine is adjusted according to the
chosen assist level. During the ride you may adjust the assist
level according to actual need.
If you drive uphill you may apply full power whereas when you
go downhill you may disconnect the motor.
The electronic steering will automatically disconnect the motor
when you stop pedaling. Likewise the steering will disconnect
the motor when your speed exceeds 24.6 km/h.
4. Highway code
The Promovec Electric e-bike is built according to the guidelines
of the EU standards EN 14764 and EN 15194.
There are no requirements in respect to a driving license, a
license plate or the use of a crash helmet.
When riding in the traffic you must observe the rules which apply
for cyclists. It is strongly recommended that you wear a cycle
helmet.
7