Promovec Electric is manufactured according to the most recent production technology, and we have put great emphasis on ensur- ing a high quality standard. Promovec Electric has a strong frame and a high performance as well as it is built to meet the Scandina- vian climatic conditions.
2. Product description Promovec Electric is the perfect choice if you are looking for an e-bike for commuting and for casual riding that can increase your mobility and give you excellent driving pleasure under all conditions, no matter whether you drive uphill or in a strong headwind.
Shift the gear by turning the gear lever placed in the right handlebar. Choose the appropriate gear according to speed and wish. The gear lever may vary depending on bicycle model. The above photo shows the gear lever on Promovec Electric – Element.
3.4 Mantling and dismantling of the battery Turn the battery key (ON/OFF) to open position and take the battery out of the rack. Mount the battery again by placing it in the rack and pushing it forward into position. Then turn the key to lock the battery. 3.5 Mounting of battery charger Insert the plug of the battery charger into the battery.
24.6 km/h. 4. Highway code The Promovec Electric e-bike is built according to the guidelines of the EU standards EN 14764 and EN 15194. There are no requirements in respect to a driving license, a license plate or the use of a crash helmet.
7. Turn off the charger but do not remove it from the socket un- til you are going to use the e-bike again. 6.2 Charging The Promovec Electric e-bike uses maintenance-free Panasonic Li-ION batteries. Please note, that the battery can be dismantled. The charging capacity of the battery is only 40% when delivered from the factory.
Page 9
In order to achieve maximum battery life and range of the e-bike we recommend that charging takes place in a heated room. By temperatures below 20ºC prolonged charging time must be ex- pected, with the result that charging of the battery to full capaci- ty cannot take place which again leads to reduced driving range.
Never leave your battery in your Promovec Electric e-bike for a longer period of time. Please note that the capacity of the battery will weaken over time and at lower temperatures. The more you use your e-bike the more the capacity will decrease thereby affecting the range. Over time the reduced battery performance will also be noticeable when driving in a hilly countryside.
6.4 Warning Do not heat, short, puncture or in any other way damage the battery. Do not divide or destroy the battery. Do not throw the battery into open fire. Do not lower the battery into water or any other liquid. ...
7. LCD display functions There are 6 assist levels. The set button has 2 operation modes: 1. Press the button once: The light in the LCD-display is on. By pressing the “up/down” buttons the LCD light in- tensity may be set. 2.
The error indicator is located under the speedometer and displays system errors, if any. Indications range from 02-09: "02" the controller has been exposed to high current. If the er- ror indicator continues to show error "02" after the system has been restarted, the controller is defective.
Page 14
Damage that may occur in consequence of a delayed notification of the warranty claim is not covered by the warranty. In case a defect is detected the e-bike must in no circumstances be used any longer. PRO-MOVEC guarantees that on the original day of the pur- chase the product is in perfect condition with regard to material and manufacture.
10. Technical data Promovec Electric Element Flow, Wave, Stream Shimano Nexus 8 gear Shimano Nexus 7 gear Gear with coaster brake Motor 200w brushless DC hub motor 200w brushless DC hub motor with planetary gear with planetary gear PWM/microprocessor with...
Need help?
Do you have a question about the Element and is the answer not in the manual?
Questions and answers