Description Of The Appliance; Digital Display - Argo Hydro Digit Operating Instructions Manual

•
Fill the water tank with clean water on a daily basis. Remove any residual water in the tank after every use.
Clean the water tank and nebuliser every one or two weeks and keep them clean. Do not add any aromatic
fragrances to the water in the tank.
•
Do not connect the appliance to the mains supply if the water tank is empty or if the appliance is upside-
down: this will cause the nebuliser to malfunction.
•
Do not move the appliance during operation as water leakages or malfunctions may result.
•
During winter, the water in the tank may freeze and cause the appliance to malfunction. Remove the water
from the tank.
•
Carry out maintenance on the appliance by regularly and thoroughly cleaning the tank and nebuliser.
Continuous operation of the appliance with dirt residues may lead to faults and malfunctions.
•
The internal ultrasonic nebuliser is highly sensitive. Do not touch it with fingers or rub it with metal
accessories to avoid reducing mist emission.
• Do not use hot water to avoid damaging the parts that generate mist.
WARNING:
THE ON/OFF SWITCH IS NOT THE ONLY MEANS TO DISCONNECT THE POWER SUPPLY.
ALWAYS PULL OUT THE PLUG FROM THE SOCKET IN THE EVENT OF MAINTENANCE
OPERATIONS, WHEN MOVING THE APPLIANCE OR WHEN THE LATTER IS NOT USED.
The mist discharge nozzle can rotate through 360°: the
direction of the mist may be freely adjusted.
V 04/10

DESCRIPTION OF THE APPLIANCE

DIGITAL DISPLAY

1) AUTO mode
2) QUIET mode
3) Timer 1-8 hours
4) Continuous operation
5) Mist emission level
(low, medium, high)
6) HEATING mode
(warm mist emission)
7) Humidity (%) detected by the sensor
8) Lack of water warning light
3