Cleaning And Maintenance; Cleaning The Water Tank; Cleaning The Nebuliser - Argo Hydro Digit Operating Instructions Manual

PRECAUTIONS
Warning
Always remove the plug from the socket before cleaning the appliance, or electric shocks and
•
malfunctions may occur.
Wait until the water inside the appliance cools before cleaning to avoid the risk of burns.
•
MAINTENANCE OF THE HUMIDIFIER'S EXTERIOR SURFACE
Use a damp and soft cloth to clean the humidifier's exterior surface.
Warning
Do not wet the appliance or immerse it in water to avoid electric shocks.
•
Do not use solvents, petrol, xylene, talcum powder and brushes: these products may damage the surface
•
or alter the casing colour.

CLEANING THE WATER TANK

Remove dirt from the water tank with the aid of a soft, damp cloth.
•
Use the brush supplied with the humidifier to remove deposits from the
•
smallest components then clean with a damp cloth.
Clean the appliance once or twice a week.
•
CLEANING THE BUOY
Ensure that no dust is deposited around the buoy and clean the latter
•
using the brush supplied with the humidifier: remove any deposits from
the smallest components then wipe with a damp cloth.
Clean the humidifier once or twice a week.
•

CLEANING THE NEBULISER

Clean the deposits on the nebuliser using the brush supplied with the
•
humidifier then wipe with a damp cloth.
Clean the humidifier once or twice a week.
•
Warning
Do not use metal brushes, metal blades, abrasive brushes or talcum
•
powder to clean the nebuliser surface. These products may deform the
nebuliser or cause abrasions, thereby leading to reduced mist emission
and other malfunctions.
V 04/10

CLEANING AND MAINTENANCE

1. Water tank
2. Buoy
3. Nebuliser
11