Table of Contents
Advertisement
18 | DMR HD PRO
7
Options
All HD Portal plus units are shipped out to the field with
the basic software installed. However, the software
was designed with the ability to receive multiple option
upgrades. Please contact MediaPOINTE to purchase
these options.
Installing Upgrade Packages
After your purchase of an upgrade option(s),
MediaPOINTE's tech support team will walk you through
the process of enabling your specific option(s).
®
Setting up the WiFi
Option
If equipped, this allows you to wirelessly access the
network interface of the unit. By default, the option is
then enabled, the SSID begins with "mediapointe-", it
is on channel 11 and operating as 802.11g protocol with
an IP address of 10.0.0.1. The channel and protocol can
be changed if necessary to deal with the spectrum allo-
cation at a specific location. The network name (SSID)
can also be changed.
To establish a connection, from a wireless equipped
device scan for available networks. The network
name will begin with "mediapointe-", connect to this
network. Open your browser and go to 10.0.0.1, this
will bring you to the login page.
Keycard Automation Option
The MediaPOINTE Keycard Automation completely
automates the work flow of capturing, streaming and
distributing control based on a User I.D. The Keycard
system provides a simple, user-friendly way to initiate
capture, recording and streaming applications with
complete security and control built-in. The
MediaPOINTE Keycard Automation System, if integrated
properly may enable a system to become HIPPA
compliant.
Advertisement
Table of Contents
