Table of Contents
Advertisement
6
| DMR HD
Portal plus User Manual Februar y, 2015
2
Setting Up the HD Portal plus
System Administration
Use this information when you are ready to install
the HD Portal plus hardware at your site. First,
plug in the supplied RJ 45 cable into your network
connecting the cable from your network nto the LAN
controller on the back of the unit. Second, plug the
connector from the AC Power Adapter into the 12
VDC connector on the back, then connect the Power
Adapter to AC power. Third, start the unit by pressing
the front panel Power Button
Initial Login
This section describes the procedure for a first time
Administrator login, and for setting the HD Portal
plus access rights. Administrator rights are required
to access or change any of the settings under the
Configure and Manage sections in the main menu and
to change all features of the HD Portal plus.
To log into the HD Portal plus, browse to its IP
address using your Internet web browser. The default
IP address is:192.168.1.253
Once you have navigated to the website, you will be
presented with the a login page. The screen capture
below shows the login fields. For the initial login, use
the Login ID "admin" and the default password of
"MediaPOINTE". Note that the Login ID and password
are case sensitive. The login page is shown in the
screen capture below.
Access Rights
There are three levels of access rights: admin, au-
thor and user. The Adminstrator can control all of the
functions of the HD Portal plus. The author can record,
stream and view content. The user can only view con-
tent. Note that the Login ID and the password are case
sensitive. It is not possible to change any of the login
names. Only the passwords can be changed.
Adminstrator (Username: admin)
The Administrator maintains all rights to the HD Portal
plus. Exclusive Administrator access allows the configu-
ration of: the date and time; security; IP settings; com-
mand line; e-mail and managing notifications; logging;
AV controls; AV test; jobs; and software
Author (Username: author)
The Author maintains content creation rights on the HD
Portal plus. The Author can access or change any of the
settings under the "Record/Stream" section in the main
menu. No password is required for the "author" login as
a default.
User (Username: "user")
The user can watch content. No password is required
for the "user" login as a default.
Configure Security
Changing the Administrator Password
By default, the Administrator Username and Password
are set to "admin" and "MediaPOINTE" respectively.
To change the Administrator password, enter a new Ad-
ministrator password in the New Admin Password field
(10 characters maximum) reenter the new password in
the confirm password field and click the Update button.
The next time the HD Portal plus is accessed, the new
admin password will take effect.
Be sure to write down the new administrator
password and keep it in a safe place. If you forget
Advertisement
Table of Contents
