Table of Contents
Advertisement
Modifying a Profile
Modifying a profile is very similar to copying one. Use
the screen capture on the right as a guide to set pa-
rameters. Modify each section with the information you
want in that profile as outlined in the steps below. By
checking the Icons on the Edit profiles web page.
1.
Profile name
- The name of the profile you are
editing.
2.
Auto
start- The drop down provides two choices:
OFF
and ON. Select
OFF
Select
ON
for standard control and automatic video
conference record with specified codec
3.
Format
- The drop down provides six choices:
PC,
iPod, AAC audio,WMV, DiVX andWM audio
out. Selecting
PC
provides standard H.264 with
selectable frame sizes.
4.
Main Source -
The drop down provides three
choices:
DVI
1,
Video 1 Composite
Multiple Source
Template. Selecting
1 as the input with frame size selection. Selecting
Video 1 Composite
sets
input with frame size selection. Selecting
Multiple Source Template
window that allows you to select from a variety of
available layouts.
5.
Frame Size
(if allowed)
five choices: QVGA -320x240; VGA - 640 x 480; SVGA
- 800 x 600; XGA - 1024 x 768; 720p -1280 x 720.
Choose desired frame size.
6.
Frame rate
- Enter the selected frame rate with a
maximum of 30 fps.
7.
Bitrate
- Enter the bitrate desired with a range
from 128 kbps to 5120 kbps
8.
Audio format
- The drop down provides three
choices:
Disabled
for no audio;
channel mono source;
Mono (32 kbs)
mono source at a lower bitrate.
9.
Video Address
- The multicast address and port
number for the video stream
10. Audio Address -
The multicast address and port
number for the video strea
11. Archive folder
- The location where the files are
saved on the local machine. underscore and dash
are allowed.)
12. Archive prefix
- The beginning of the file name
saved. A maximum of ten characters is allowed
with no spaces or special characters (only
underscore and dash are allowed.)
for standard control.
and
Custom
DVI 1
sets DVI
Video 1 Composite
as the
Custom
brings up a separate
-
The drop down provides
Mono (64 kbs)
for 1
for 1 channel
DMR HD
Portal plus User Manual
1
2
3
Streaming and/or Recording
4
6
7
8
9
10
11
12
13
14
15
16
13. Enable FTP upload
- Check if you want to send the
files to an FTP server after recording. If you check
this another menu will appear.
FTP Server: Enter address of the FTP
server
FTP user name: Enter registered user of
the FTP server
FTP user password: Enter Password of the FTP
server user
FTP upload directory: Enter the path to where
the file(s) will be stored on the FTP server
Delete: Check this box if you want to delete
local media after upload.
14. Video transcoding
- Makes a copy of the record-
ed file in the selected format. This provides four
checkbox choices: H.264, Flash and iPod. Check
the format you want.
15. Enable titles and credits
insert a JPEG image at the beginning and end of
a recording. You must upload images first in the
Titles & Credits section of the main menu.
16. Submit or Cancel -
Click
or
Cancel
if you want to reject this profile.
|15
- Select if you want to
Submit
if you want to save
Advertisement
Table of Contents
