Advertisement
User Manual
The Control page allows you to switch the C6 HDMI Matrix On/Off, choose the Input (1 – 4) to be used
with each Output or to Mute (switch off) an Output. In addition you can quickly change all Outputs to
display a single Input using the All Output Set To option. The C6 HDMI Matrix's EDID setting can also be
switched between STD (Internal/Preset) to TV (External/Cloned) from this page, whilst choosing to
complete a System Reset will return the Matrix to its default Input/Output arrangement, A1, B2, C3 & D4.
The User Setting page allows you to change the IP configuration. The system will ask for a reboot of the
device every time any of the settings are changed. The IP address needed to access the Web GUI
control will also need to be changed accordingly on the web address entry bar.
Troubleshooting
There is no display on the screen.
Check that the DC plug and jack used by external power supply are firmly connected.
Check that the Cat.5e/6/7 cable is plugged in correctly and that the Link Status LED is lit.
Check that the HDMI source and display are both powered on and active. Power off all the devices,
then power on in this order: first, the matrix unit, then the display and finally the source.
For several HDMI devices it may be helpful to unplug and replug their HDMI connection to re-initiate
the HDMI handshake and recognition.
Reduce the length of Cat.5e/6/7 or HDMI cable used, or use a higher quality cable.
English
Advertisement
