Advertisement
1
2
3
– 19 –
SHIFT CABLE (Deluxe model only)
1. Check:
• Reverse gate stopper lever position
Incorrect → Adjust.
Checking steps:
• Set the shift lever to the reverse position.
• Check that the reverse gate 1 contacts
the stopper 2.
2. Adjust:
• Shift cable joint
Adjustment steps:
• Loosen the locknut 1.
• Disconnect the cable joint 2 from the ball
joint 3.
• Situate the reverse gate to the stopper on
the bracket and the lever to the reverse
gate.
• Turn the cable joint to align it with the ball
joint.
Turn in
Shortens.
Turn out
Lengthens.
• Turn out the cable joint nine times a to
extend cable 7 mm (0.28 in) from the
aligned position.
WARNING
The cable joint must be screwed in more
than 8 mm (0.31 in).
• Connect the cable joint and tighten the
locknut.
Locknut:
3.8 N • m (0.38 kgf • m, 2.7 ft • lb)
E
Advertisement
