– Call the second participant as explained in Make a
new call during a call.
– Press < and select Conference. This joins the calls
to the conference.
– Repeat step 2 and 3 to allow new participants to be
connected to the Conference.
– Press Option and select End all to end the call. Or
press E.
– Any call (participant) can be disconnected by press
Option key and select End single.
• Call waiting
– Press Options key. The first call is put on hold.
– To switch between two calls, press Option and choose
Swap.
– To end the active call press E. (Or to end both calls
at the same time. Press Option, move to End all calls.
and press OK.)
23