Creating Bootable Usb Flash Disk - BenQ Joybook S35 Series User Manual

6. After disc burning finishes (the progress bar shows 100%
completion), click
window to proceed.
Exit Yes
7. Click > to leave the application.
Store the discs in a safe place for future use.

Creating bootable USB flash disk

You can use QDataTrove to create a bootable USB flash disk to
recover your system to the factory settings.
• With QDataTrove you can create bootable USB flash disks
only. Other USB storage devices are not recommended for
the operation.
• The minimum capacity of your USB flash disk is 8GB. The
required space may vary depending on the size of your
system image.
1. Connect a USB flash disk to your Joybook.
button to select Create Bootable USB
2. Click the
Disk.
3. Select a connected USB flash disk from the USB device drop-
down menu. Select the USB flash disk carefully if you have
more than one USB flash disk connected to your Joybook at
the same time. All the data stored on the one used for
bootable USB flash disk will be erased.
4. If there is sufficient space on the select USB flash disk, you
can click OK to proceed.
5. After the bootable USB flash disk is complete (the progress
bar shows 100% completion), click
corner of the window to proceed.
6. Click Exit > Yes to leave the application.
58 Recovering your system using QDataTrove
at the upper right corner of the
at the top right
Store the USB flash disk in a safe place for future use.
For more information about how to use QDataTrove, refer to
the online help.