Using Bios Setup; When And How To Use Bios Setup - BenQ Joybook S35 Series User Manual

Using BIOS setup

BIOS (Basic Input/Output System) is a layer of software, called
firmware, that translates instructions from other layers of
software into instructions that the Joybook hardware can
understand. The BIOS settings are needed by the Joybook to
identify the types of installed devices and establish special
features.
BIOS settings are specific to your Joybook hardware. Do NOT
change existing BIOS settings unless you are sure they need
to be changed, and are aware of the consequences. Any
incorrect BIOS settings may degrade the performance,
operation and functionality of your Joybook.
For latest BIOS updates, visit http://www.benq.com/support/.
When and how to use BIOS
setup
You need to use BIOS setup when:
• You see an error message on the screen requesting you to run
BIOS setup.
• You want to restore the factory default settings.
• You want to modify some specific settings according to the
hardware.
• You want to modify some specific settings to optimize system
performance.
• The BIOS setup screen shown in this chapter is for your
reference only. The actual items or settings on your Joybook
may differ.
• The BIOS setup program may have been updated after the
publication of this manual.
• The settings you select in your operating system might
override similar settings in BIOS setup.
To run BIOS setup, press the <F2> key immediately when the
BenQ logo appears on the screen during system startup. The
logo shows up on the screen for only a few seconds, so you must
press the <F2> key at the time.
Using BIOS setup 49