Vehicle Configuration - CITROËN C3 Handbook

Vehicle configuration

once the "Vehicle Configuration" menu has
been selected, you can activate or deactivate
the following equipment:
- wiper linked with reverse gear (refer to the
"Visibility"),
- guide-me-home lighting (refer to the
"Visibility"),
- parking sensors (refer to the "driving" section).
Using this menu, you can also reinitialise the
tyre under-inflation detection system (see the
"Safety" section).
Options
once the "options" menu has been selected,
you can start diagnostics of the status of the
equipment (active, not active, faulty).
Display settings
once the "display settings" menu has been selected,
you can gain access to the following settings:
- year,
- month,
- day,
- hour,
- minutes,
- 12 or 24 hour mode.
F once you have selected a setting, press
the "7" or "8" buttons to change its value.
F Press the "5" or "6" buttons to switch
respectively to the previous or next setting.
F Press the "OK" button to save the change
and return to the normal display or press
the "Back" button to cancel.
Multifunction screens
Setting the date and time
F Press the MENU button.
F Select "display settings" using the "5" or
"6" button.
F Press "OK" to confirm the selection.
F Select the "Year" function using the "5" or
"6" button.
F Press "OK" to confirm the selection.
F Choose the desired value, using the "7" or
"8" button.
F Press "OK" to confirm the selection.
F Repeat the procedure to set the "Month",
"day", "Hours", and "Minutes".
2
31