Table of Contents
Advertisement
Item
Syslog Access Setup
Mail Alert Setup
3
.
1
3
.
6
T
i
m
e
a
n
d
3
.
1
3
.
6
T
i
m
e
a
n
d
It allows you to specify where the time of VigorAP should be inquired from.
Available parameters are explained as follows:
Item
Current System Time
Use Browser Time
Use NTP Client
Time Zone
NTP Server
Description
Enable - Check Enable to activate function of Syslog.
Server IP Address -The IP address of the Syslog server.
Destination Port -Assign a port for the Syslog protocol. The
default setting is 514.
Log Level - Specify which level of the severity of the event will
be recorded by Syslog.
Check Enable to activate function of mail alert.
SMTP Server - The IP address of the SMTP server.
Mail To - Assign a mail address for sending mails out.
Mail From - Assign a path for receiving the mail from outside.
User Name - Type the user name for authentication.
Password - Type the password for authentication.
User Login - VigorAP will send an e-mail out when a user
accesses into the user interface by using web or telnet.
D
a
t
e
D
a
t
e
Description
Click Inquire Time to get the current time.
Select this option to use the browser time from the remote
administrator PC host as router's system time.
Select to inquire time information from Time Server on the
Internet using assigned protocol.
Select a time protocol.
Type the IP address of the time server.
Use Default – Click it to choose the default NTP server.
161
VigorAP 900 User's Guide
Advertisement
Table of Contents
