GE Monogram ZDOD240 Owner's Manual page 10

Glass shelves
QuickSpace
™
Shelf
10
Tempered glass shelves in the outdoor/
indoor refrigerator are removable for easy
cleaning or for storing larger items.
To remove a shelf, open the door
completely to avoid potential damage to
the gasket. Lift up on the back of the shelf
slightly. Tilt the shelf to one side at an angle
while pulling forward.
Appearance may vary
To remove, lift up on the back
of the shelf
This shelf splits in half and slides under itself
for storage of tall items on the shelf below.
Step 1: Lift the back edge of the front half
of the shelf.
Step 2: Pull slightly forward.
Step 3: Lower the back edge of the front
half of the shelf while sliding it underneath
the back half.
The entire Quick Space shelf can be
removed and replaced (see Glass Shelves
section).
Controls and Features
To replace a shelf, open the door
completely to avoid potential damage
to the gasket. Tilt the shelf to one side at
an angle and slide toward the back wall,
placing one side onto the shelf support.
Place the other side onto the opposite
shelf support. Ensure rear locking tabs are
engaged. When installed properly, the shelf
will not slide forward when gently pulled.
Tilt the shelf at an angle while
removing or replacing
Outdoor/Indoor Refrigerator
Place in slots when replacing
the shelf
Step 1
Step 2
Step 3