Main Parts - Stihl FH-KM Instruction Manual

English

Main Parts

2
1
16
6
3
4
7
5
8
1 Cutting Blades
2 Blade Scabbard
3 Blade Drive Gear
4 Quadrant
5 Angle Drive
8
6 Adjusting Lever
7 Sliding Sleeve
8 Drive Tube
9 Sleeve
Definitions
9
1 Cutting Blades
Steel blades for cutting hedges and
shrubs.
2 Blade Scabbard
Covers cutting blades when hedge
cutter is not in use.
3 Blade Drive Gear
Converts rotary movement of angle
drive into reciprocating movement
of cutting blades.
4 Quadrant
Locks the cutter bar in the required
position.
5 Angle Drive
Transmits rotary motion of drive
shaft to the blade drive gear.
6 Adjusting Lever
Used to set cutter bar to the
required angle.
7 Sliding Sleeve
Locks and unlocks the cutter bar
adjusting mechanism.
FH-KM