Operation; Electrical Connection Information - Anvil CDA1003 R01 Installation Operation And Care

OPERATION

The unit is able to heat product from the top or the bottom and
alternatively from the top and bottom simultaneously with the
halogen display lamp on permanently.
1. The unit is switched on via the 'mains switch'(1).
This switches on the halogen display light.
2. Once the 'mains switch' is switched on the user can chose to
activate either the top and/or bottom elements depending on
the type of heating required.
3. The top element is energized via the illuminated rocker
switch (2) shown in the diagram below.
4. The bottom element is energized with the energy regulator knob
marked 0-6 (3)and set to the desired temperature. Note that in
position 6 the element will remain energized continuously.
CONTROL PANEL LAYOUT
INDICATOR LAMP
ILLUMINATED ROCKER
SWITCH (2)
TOP ELEMENT
ENERGY REGULATOR CONTROL
KNOB (3)
MAIN SWITCH (1)

ELECTRICAL CONNECTION INFORMATION

MODEL DESCRIPTION
CDA1003 R01 MULTIFUNCTION
WARMER STATION
LEGEND DESCRIPTION
S1 NON ULLUMINATED ROCKER SWITCH
S2 ROCKER SWITCH
L HALOGEN OVEN LAMP
ER ENERGY REGULATOR
E1 TOP ELEMENT
E2 BOTTOM ELEMENT
H1 PILOT LIGHT
WIRING DIAGRAM
MODEL CODE: CDA1003 R01
MODEL: MULIFUNCTION WARMER
VOLTS POWER
(V /Hz) (W)
230/50 1900
PART NUMBER
1-RS-NI
1-NRS-BMA4002
1-LB-CGA0016
1-ER-URS0012
5-1000W-CD
5-1000W-CDA1003
1-PL-BMA0001
N L E
230V
S1
L
S2
E1
S1 P2 P1
ER
S2 4 2
H1
E2