Connecting To A Computer (E. G. With Microsoft Windows Xp) - Pro-Ject Audio Systems Record Box USB Instruction Manual

Connecting to a Computer (e. g. with Microsoft
1. Connect the USB-output of the Record Box USB to a free USB-socket on your computer and
turn it on/make sure it is powered on.
Please note: Connection should be made to an USB-socket of your computer directly. Connecting to
USB-hubs or switches can cause problems.
2. The "new hardware found assistant" will automatically detect the unit and announces it as a "USB audio codec".
3. open the System menu via "Start" (Windows key)
Settings
Control Panel
Sound and Audio Devices
5. In the Sounds and Audio panel select the Audio
tab. In the Replay section select your sound card
from the pull-down lists (usually preselected).
7. Confirm your selections by clicking the OK button.
8. Close the control panel windows and start your recording programme.
In case you do not have a recording programme installed on your computer, you may download one free from
the Internet. Recording programmes may be found by searching Google or Altavista.
Please be aware that downloads from the Internet are made entirely at your own risk. Under no
circumstances can we carry responsibility or provide support for software products sourced from the
internet or for any damage or problems arising from the use thereof. All downloads should be
checked with an up-to-date anti-virus programme. License fees may be applicable.
4. In the control panel open the
"Sound and audio" menu.
6. Select the USB Audio CODEC from the pull
down list in the Recording section. Make sure
your sound card is selected for Replay.
© Audio Trade GmbH · Pro-Ject Record Box USB · Revision 1.2.10/1.3.10
™ Windows ™ XP)
3