Pro-Ject Audio Systems Tube Box DS Instructions For Use

Pro-Ject Audio Systems Tube Box DS Instructions For Use

Hide thumbs Also See for Tube Box DS:

Advertisement

Quick Links

INSTRUCTIONS FOR USE
Pro-Ject Tube Box DS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Tube Box DS and is the answer not in the manual?

Questions and answers

Summary of Contents for Pro-Ject Audio Systems Tube Box DS

  • Page 1 INSTRUCTIONS FOR USE Pro-Ject Tube Box DS...
  • Page 2: Safety Instructions

    50dB, input capacitance 367pF, input impedance 47kohms Ortofon Rondo Red (Low-Output MC) input gain 60dB, input capacitance *, input impedance 10ohms. * Input capacitance is irrelevant for low-output MC cartridges 1000 © Audio Trade GmbH · Pro-Ject Tube Box DS · Revision 2013.1.15...
  • Page 3: Input Gain

    The literature for cartridges should also specify the correct input impedance (low-output MC cartridges) and the correct input capacitance (high-output MC and MM cartridges), into which the cartridge is designed to work. If in doubt please consult your dealer. © Audio Trade GmbH · Pro-Ject Tube Box DS · Revision 2013.1.15...
  • Page 4: Mains Power Connection

    No earth connection from cartridge or arm, or arm cable to phono amplifier, or earth loop. Output too quiet or too loud, or distorted: Input gain incorrectly set - input overloading or insufficiently amplified. © Audio Trade GmbH · Pro-Ject Tube Box DS · Revision 2013.1.15...
  • Page 5 This guide was produced by: Audio Trade GmbH changes to the technical specification without prior Copyright © 2012. All rights reserved. notice as deemed necessary to uphold the ongoing process of technical development. © Audio Trade GmbH · Pro-Ject Tube Box DS · Revision 2013.1.15...

Table of Contents