Playing Mpeg4 Video Files - Archos AV320 User Manual

8

Playing MPEG4 Video Files

The AV300 series can play video fi les of sizes up to 640 by 368 pixels in European
standard. The AV300 will not directly play fi les of type .mov, .mpg, .mpeg, nor .avi
fi les created with codecs other than XviD and DivX™. If you have some of these
other fi le types that you would like to view on your AV300, you must use the software
on the included CD to re-encode them into the proper XviD or DivX™ MP4 with an MP3
sound stream. See chapter 9 for more details.
signal will be sent out to the television. If you don't see a clear image, you may have to
set your AV320 to your local television standard (NTSC or PAL).
for North American televisions or PAL for European televisions. Press and hold the ON
button œ for three seconds to switch back to viewing on the built-in screen.
While viewing a video fi le, you can:
• Use the PLAY/GO button to pause/unpause the video.
• Use the Joystick UP/DOWN to control the volume.
• Hold the Joystick RIGHT/LEFT to fast forward or fast rewind through the video.
• Click the top function button to go to display the elapsed and remaining video
play time.
• Click the center function button to access the Setup screen.
• Click on the bottom function button to put the video into slow-motion view.
You can. cycle through the values Normal speed, 1⁄2 speed, 1⁄4 speed, and 1/8
speed. The sound is muted when in slow motion.
Hold down on the PLAY œ button for three seconds to return to the
built-in screen mode. You will have to stop your video and go to the
Display Settings in the Setup menu. Click on Display, then select NTSC
Like a music fi le, you simply select the fi le from
the Browser mode and then click on PLAY/GO
œ. To send the video signal out to a television,
fi rst connect the supplied A/V cable to your
television's auxiliary inputs. The yellow lead of the
cable is the video signal, the Red for Right stereo
and White for left stereo. Switch your television
to auxiliary video input (often found just below
channel 1 – sometimes called L1 or L2). Press and
hold the PLAY œ button for three seconds. The
built-in AV320 screen will go blank and a video
37