Troubleshooting and Maintenance
Configuring the Computer
System Devices Menu
Setting
PS/2 Pointing Devices
FDD Controller
Legacy USB Support
Internal LAN
Mini PCI Slot 1
Mini PCI Slot 2
Serial port
Base I/O address
Interrupt
Infrared port
Mode
Base I/O address
Interrupt
DMA channel
Parallel Port
Mode
Base I/O
Interrupt
DMA channel
122
Description
Disables the internal pointing devices when an external PS/2
mouse is connected.
Enables the floppy drive.
Enables BIOS support for USB mouse, keyboard, and floppy
disk drive.
Enables the internal (wired) LAN.
Enables the PCI slot normally used for a wireless LAN, which
is located under the door on the bottom of unit.
Enables the PCI slot sometimes used for a modem.
Enables the serial port.
Sets the I/O address.
Sets the I/O interrupt.
Enables the infrared port.
Sets the hardware to support FIR (Fast IR) or SIR (Standard
IR) infrared communications.
Sets the I/O address.
Sets the I/O interrupt.
Sets the DMA channel for Fast IR (FIR) mode.
Enables the parallel port.
Sets the port to output only, bi-directional, EPP, or ECP.
Sets the I/O address.
Sets the I/O interrupt.
Sets the DMA channel for ECP mode.
Reference Guide
Default
Auto
Enabled
Disabled
Enabled
Enabled
Enabled
Enabled
3F8h
IRQ4
Disabled
FIR
2F8h
IRQ3
DMA0
Enabled
ECP
378h
IRQ7
DMA3