Dishwasher Cycles And Options; Wash Cycle Information - Bosch she43rp2uc Use And Care Manual

Dishwasher Cycles and Options

Wash Cycles (model dependent)
Heavy: Best for cleaning items with baked-on food or grease. These dishes would normally require
soaking.
Auto: With our most complex soil sensing capability, this cycle is perfect for use with mixed loads of
dishware and varying amounts of food soil. This is the most flexible cycle and is a good choice for
everyday use.
Normal: Thoroughly cleans a full load of normally soiled dishes.
Note: The Energy Guide Label was based on this soil sensing cycle with all available options turned off. As prescribed
in the energy test procedure, the unit was tested without any Rinse Aid in the Rinse Aid dispenser. A single dose of
detergent was used in the Detergent Dispenser, with no detergent used in the prewash. The test was conducted with
the upper rack in the lowest position.
Express: Cleans lightly soiled dishes and reduces overall wash time. Use this cycle to clean glasses and
dessert dishware that may need to be reused at the same event.
Half Load: Reduces the energy and water consumption when washing small, lightly soiled loads that fill
approximately half of the dishwasher's capacity.
Wash Cycle Options
Delay Start (model dependent): This option allows you to delay the start time of your dishwasher up
to 19 hours.
Sanitize: The Sanitize feature is available only in the Heavy, Auto, Normal and Hak lf Load cycles. Press
the "Sanitize Option" button to activate the Sanitation features during these cycles. The technical sanita-
tion measures may also improve the drying results. The sanitize LED or symbol
tion requirements are met.
Note: The dishwasher automatically defaults to Auto Wash when turned off and back on. If you used the sanitize option
in your last cycle, the dishwasher will default to Auto Wash with the Sanitize option selected when you turn it on.

Wash Cycle Information

Note: To save energy, this dishwasher has a "Smart Control" where the sensors in the dishwasher automatically adjust
the cycle length, temperature and water changes based on the amount of food soil and the incoming water tempera-
ture. The "Smart Control" makes decisions that can cause the cycle time and water usage to adjust intermittently.
Wash cycle times are based on 120°F water supply. If your household water supply is different than 120°F, your
dishwasher's cycle times may be impacted
cycle time
cycle time with Sanitize
water consumption
wash temperature
rinse temperature
Note: Only sanitizing cycles (Heavy, Auto, Normal and Half Load) have been designed to meet the requirements of 6 for
soil removal and sanitization efficacy. There is no intention, either directly or indirectly, that all cycles have passed san-
itization performance tests.
14
.
Table 2 - Wash Cycle Information
Heavy Auto
135 min 95-119 min
135 min 105-135 min
23.2-27.4 L 10.4-22.5 L
6.1-7.2 gal 2.7-5.9 gal
66-72°C 55-72°C
151-162°F 126-162°F
72°C 65-72°C
162°F 156-162°F
Normal Express
115 min 30 min
125 min not available
8.9-18.3L 13.1 L
2.4-4.8 gal 3.5 gal
50-69°C 45-72°C
122-156°F 113-162°F
45-69°C 50°C
113-156°F 122°F
will light when sanita-
Half Load
99 min
120 min
14.1-18.3 L
3.7-4.8 gal
55-72°C
126-162°F
72°C
162°F