Toshiba e-studio 12 Operator's Manual page 23

Problem Possible cause
Half of the The page layout is too
complex.
page is
blank.
Resolution is set to 600 dpi.
Page orientation setting may
be incorrect.
There may be too many
applications open.
The paper in the printer may
be larger than the paper size
specified in your application
or printer driver.
Interface cable
specifications may be
incorrect.
The CPU specifications may
be incorrect.
The computer may have
insufficient random-access
memory (RAM).
Solution
Simplify the page layout.
Set resolution to 300 dpi.
Change the page orientation with the
printer driver.
Close all unnecessary applications
before printing.
Load the correct paper into the
printer.
See the interface specifications.
Check that the CPU of your
computer is 486DX 66 MHz or
better.
Install more random-access memory
(RAM) in your computer.
TROUBLESHOOTING
See
page:
—
16
16
—
—
27, 28
6
6
3
21