Uninstalling Printer Driver - Toshiba e-studio 12 Operator's Manual

Select File from the list of options in the Ports window, and then click the OK button.
4
Select the new printer you would like to use from the list in the Installed Printers
5
window, and then click the Connect button.
Select the printer port to use for the new printer, and then click the OK button.
6
Click the Set As Default Printer button, and then click the Close button.
7
To use the e-STUDIO Series again, perform the same procedure but select the
port to be used (for example, LPT1) in step 4.

UNINSTALLING PRINTER DRIVER

If the printer driver is not installed properly or if you need not use this printer any more, uninstall
the printer driver from your computer using the following procedure.
If using Windows 95/Windows 98/Windows NT 4.0, click Start, Program, TOSHIBA
1
e-STUDIO Series, and Uninstall e-STUDIO Series.
If using Windows 3.1x, double-click the TOSHIBA e-STUDIO Series icon in Program
Manager and double-click the Uninstall e-STUDIO Series icon.
When the "Confirm File Deletion" window appears, Click the Yes button.
2
When the "Remove Programs From Your Computer" window appears, click the OK
3
button.
USING OTHER INSTALLED DRIVERS
3
25