Table of Contents
Advertisement
Settings
Settings
GPRS settings
GPRS(General Packet Radio Service) is a technology that allows
mobile phones to be used for sending and receiving data over the
mobile network. GPRS is a data bearer that enables wireless
access to data network such as the Internet.
Before you can use GPRS technology
- You need to subscribe to the GPRS service. For availability and
subscription to GPRS service, contact your network operator or
service provider.
- You need to save the GPRS settings for the applications used
over GPRS.
Power on
If you select Power on and you are in a network that supports
GPRS, the phone registers to the GPRS network and sending short
messages will be done via GPRS. Also, starting an active packet
data connection, for example, to send and receive e-mail, is quicker.
When needed
If you select When needed, the phone will use a GPRS connection
only if you start an application or action that needs it. The GPRS
connection is closed after it is no longer required by any application.
Note
If there is no GPRS coverage and you have chosen Automatic,
the phone will periodically try to establish a connection.
Reset settings
You can reset your phone to its default configuration. To do so,
proceed, as follows.
1. Select the Reset settings menu option.
2. Enter the 4-digit security code.
Note
The security code is preset to 0000.
To change this, refer to page 86.
C1200 User Guide
Menu-
-7
(Menu-
-7-1)
(Menu-
-7-2)
Menu-
-8
88
Tools
Press the menu key (
) and select Tools using the navigation
keys.
Calculator
Using this feature, you can use the phone as a calculator. The
calculator provides the basic arithmetic functions: addition,
subtraction, multiplication and division. (You can enter numbers up
to the second decimal place).
Using the Calculator
1. Enter the first number using the numeric keys.
2. Press the corresponding navigation key to select a mathematical
function.
Note
To erase any mistakes or clear the display, press the
To include a decimal point, press the
To include a minus sign, press the
3. To calculate the result, press the left soft key [Result] or OK key.
4. After calculation, press the left soft key [Reset] to return to the
menu.
Unit converter
This converts any measurement from one unit to another.
There are 4 types that can be converted into units: Length, Area,
Weight and Volume.
1. Select one of four unit types by pressing the left soft key [Unit].
2. Move to the current unit section by pressing the down navigation
key.
3. Select the unit you want to convert using the left/right navigation
keys.
4. Move to the Convert unit section by pressing the down navigation
key.
C1200 User Guide
Menu-
-1
key.
key.
key.
Menu-
-2
89
Advertisement
Table of Contents
