Table of Contents
Advertisement
Settings
Answer mode
Select the desired mode to answer a call.
Flip open: When the phone rings, you can answer a call simply
]
by opening the folder.
Press any key: When the phone rings, you can answer a call by
]
pressing any key except the
Send only: You can answer a call only by pressing the send key.
]
Send my number
This network service lets you decide whether your phone number is
displayed (On) or hidden (Off) from the person you are calling.
Select Set by network to reset the phone to the setting that you
have agreed upon with your service provider.
Call waiting
(Network Service)
The network will notify you of a new incoming call while you have a
call in progress. Select Activate to request the network to activate
call waiting, Cancel to request the network to deactivate call waiting,
or View status, to check if the function is active or not.
Minute minder
When set to On, the phone will beep every minute during an
outgoing call to keep you informed of the length of the call.
Auto redial
Select On, and your phone will make a maximum of four attempts to
connect the call after an unsuccessful call attempt.
C1200 User Guide
(Menu-
-4-2)
key and the right soft key(
).
(Menu-
-4-3)
(Menu-
-4-4)
(Menu-
-4-5)
(Menu-
-4-6)
82
Settings
Select line
(SIM dependent)
This menu is shown only if the SIM card supports two subscriber
numbers, that is, two phone lines. Select which phone line (between
Line 1 and Line 2) you want to use for making calls and sending
short messages. Calls on both lines can be answered irrespective of
the selected line.
Note
You will not be able to make calls if you select Line 2 and have
not subscribed to this network service.
Closed user group
(Network dependent)
Restricts usage of the phone with numbers that belong to certain
user groups. When this function is used, every outgoing call is
associated with a group index. If a group index is specified, it is
used for all outgoing calls. If no group index is specified, the
network will use the preferential index (a specific index that is stored
in the network).
Default: Activates the default group agreed on with the network
]
operator.
Set: Select this to activate the selected CUG Index.
]
Edit: You can edit the CUG name and CUG Index.
]
Delete: Delets the selected CUG.
]
Delete all: Delets all CUG.
]
C1200 User Guide
(Menu-
-4-7)
(Menu-
-4-8)
83
Advertisement
Table of Contents
