Advertisement
Fixed dial number
(SIM dependent)
You can restrict your outgoing calls to selected phone num-
bers. The numbers are protected by your PIN2 code.
Change codes
PIN is an abbreviation of Personal Identification Number to
prevent use by unauthorized person.
You can change the access codes: PIN1 code, PIN2 code,
Security code.
Network settings
You can select a network which will be registered either
automatically or manually. Usually, the network selection is
set to Automatic.
Network selection
]
Automatic
If you select Automatic mode, the phone will automatically
search for and select a network for you. Once you have
selected "Automatic", the phone will be set to "Automatic"
even if the power is off and on.
]
Manual
The phone will find the list of available networks and show
you them. Then you can select the network which you want
to use if this network has a roaming agreement with your
home network operator. The phone let you select another
network if the phone fails to access the selected network.
]
Preferred
You can set a list of preferred networks and the phone
attempts to register with first, before attempting to register to
any other networks. This list is set from the phone's prede-
fined list of known networks.
All manuals and user guides at all-guides.com
[Menu #-4-4]
[Menu #-4-5]
[Menu #-5]
[Menu #-5-1]
Band selection
Use this to set the network band between two choices, GSM
900/1800 or GSM1900.
GPRS settings
You can set GPRS service depending on various situations.
Switch on
If you select this menu, the phone is automatically registered
to a GPRS network when you switch the phone on. Starting a
WAP or PC dial-up application created the connection
between phone and network and data transfer is possible.
When you end the application, GPRS connection is ended but
the registration to the GPRS network remains.
When needed
If you select this menu, the GPRS connection is established
when you connect a WAP service and closed when you end
the WAP connection.
Memory status
You can check free space and memory usage of each reposi-
tory, SIM memory. You can go to each repository menu.
Reset settings
You can initialize all factory defaults. You need Security code
to activate this function.
[Menu #-5-2]
[Menu #-6]
[Menu #-6-1]
[Menu #-6-2]
[Menu #-7]
[Menu #-8]
33
LG-G262
Advertisement
Chapters
