Misting Nozzel Maintenance; Storage - NewAir AF-520 Owner's Manual

2. To ensure adequate air circulation to the motor, keep the vents at the rear
of the motor housing clear of dust, fluff, etc. Unplug the fan before using a
vacuum cleaner to clean the grilles. It should not be necessary to
disassemble the fan to clean it.
3. Wipe the exterior with a soft cloth soaked in a mild detergent. Do not use
any abrasive detergents or solvents to avoid damaging the surface. Do not
use gasoline, thinner, or bending to clean the fan.
4. Do not allow water or any other liquid into the motor housing or interior
parts.

MISTING NOZZEL MAINTENANCE

If the misting nozzles become clogged, unscrew them from the fan grille and
soak in vinegar or a lime scale remover until they are clear of buildup. Use a
non-metallic brush to scrub them if necessary. If the nozzles remain obstructed,
contact the manufacturer for replacements.
Warning: never try to clear the nozzles with pins or other sharp objects as this
can cause damage.
If the misting hose valve becomes clogged, unscrew the head of the valve and
flush it with running water to clear debris. Make sure the screen inside the
misting hose is clean as well.

STORAGE

Before storing, follow the assembly instructions in reverse to dismantle the fan.
Clean the individual parts with a soft, damp cloth and allow the pieces to dry
completely before packing. Pack it in the original box, or cover it with plastic or
cloth. Store the fan in a clean, dry place.
9
A Name You Can Count On