Tamron IP3D02 User Manual page 28

※
In above path fields, [/] means root directory path that provided by remote FTP server;
[pathname] means saving files under 'pathname' folder. If the folder hasn't existed, system
will create it automatically.
Utility Protocol
Define which protocol that device uses for sending message to SecuUtility. Default is set as
Bonjour mode.
Protocol
Select protocol type as Bonjour or Broadcast.
Bonjour
Send camera existing message to request clients. Use can manually modify camera
setting through SecuUtility with this protocol.
Broadcast
Send camera existing message to every client. Use can only get camera information
through SecuUtility but unable to change setting.
Multi-cast IP
Multi-cast IP address for selected protocol. This value is unchangeable.
Multi-cast Port
Multi-cast port for selected protocol. This value is unchangeable.
ONVIF
Device supports transmitting stream through ONVIF protocol. After enable this service,
integrated software can connect to the device by standard ONVIF protocol.
Status
Enable this item to start ONVIF service of the device.
Multi-cast IP
Multi-cast IP address for ONVIF. This value is unchangeable.
- 28 -