Tamron IP3D02 User Manual page 10

Please fill in username and password. (Default username and password is admin/
admin)
User can manually modify system setting: connection type and web port. Please
click "Save" button before complete change.
SecuUtility provides firmware upgrade, please click on firmware upgrade checkbox,
and select new firmware (.img) in pop-up window. System will automatically start
firmware upgrade.
Above system setting function only works in firmware version is later than V1.x.x.x. If the
firmware version of the device is not supportive, please notify your system administrator
for firmware upgrade.
(7) Click "Scan" to refresh searching supportive devices in local LAN.
(8) If there is no DHCP server in local LAN, SucuUtility can automatically assign IP address for
connected network device. When SecuUtility searches network device which IP address is
192.168.100.100 in LAN, system will automatically assign an IP address of which is the same
network segment as client PC. To enable this function, please "Enable" on Auto Assign IP
item. Please notice that DO NOT enable this function when there is already a DHCP server in
LAN in case of IP conflict issues.
Device Login
Once you have logged in, you will see a pop-up information bar requiring your attention for
installing ActiveX Control, use mouse right click to install ActiveX control.
Then a window will appear asking you to confirm whether or not you want to install the ActiveX
control. Select "Install".
- 10 -