Assign Pictures; Camera Settings - Kyocera Rally User Manual

Multiple Shots
This feature allows you to take three, six,
or nine shots in a continuous sequence.
When you take multiple shots, the icon will
be displayed at the upper left corner of the
screen.
1. From camera mode, press OPTIONS
(right softkey) > Fun Tools > Multiple
Shots.
Note: When taking multiple shots, the
resolution is temporarily set to 0.1M.
2. Highlight an option (3 Shots, 6 Shots,
or 9 Shots) and press
● Select Off to deactivate the multiple
shots option.
3. Highlight the duration of the interval
between shots (Normal or Fast) and
press .
4. Press or CAPTURE (left softkey) to
take the pictures. (The screen will
display up to nine thumbnail pictures.)

Camera Settings

You can customize the camera settings.
1. From camera mode, press OPTIONS
(right softkey) > Camera Settings.
2. Highlight an option and press
- Resolution to select a picture's file
size from 0.3M or 0.1M.
- Quality to select the picture quality
setting from Fine, Normal, or
Economy.
42
.
:
- Shutter Sound to select a shutter
sound from Default, "Say
Cheese," or "Ready."
- Status Bar to display or hide status
indicators and softkeys. These can be
revealed or hidden by pressing the
navigation key up or down.
- Auto Save to to select the storage
area for the pictures. See "Set Storage
Options" on page 43.
- Auto Review to select whether or not
the picture is displayed for review after
you take a picture.

Assign Pictures

Assign a picture as a graphic or as a
picture ID.
1. Take a picture. See steps 1-3 on Take a
Picture (page 40).
2. With the picture displayed, press
OPTIONS (right softkey) > Assign.
3. Select an option:
- Picture ID to assign the picture to a
Contacts entry as well as to unsaved
phone numbers, or to private and
unknown phone numbers. See "Set a
Picture ID" on page 18.
- Graphic to assign the picture as a
graphic.
Tip: You can also assign pictures from
the My Photos menu. See "In Phone
and Memory Card Folder Options" on
page 43.
User Manual