Page 1
12V LITHIUM-ION DRILL/DRIVER OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item#: 46174...
Thank you very much for choosing an IRONTON product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it.
Page 3
• Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection for appropriate conditions will reduce personal injuries. • Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts.
Page 4
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. • Feed the workpiece in the correct direction and speed. Feed the workpiece into a blade, cutter, or abrasive surface against the direction of the cutting tool’s direction of rotation only.
Page 5
• Never use a battery which has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately. • Use designated battery pack (Ironton™ - Item# 46173) and charger for this tool. Use of any other batteries may result in a risk of fire.
Page 6
• Before Using the Battery Charger, read all instructions and cautionary markings on (1) Battery Charger, (2) Battery, and (3) Product using battery. • Use only the charger which accompanied your product or direct replacements as listed in this manual. Do not substitute any other charger. •...
Page 7
IMPORTANT BATTERY INFORMATION: DISPOSING OF THE BATTERY • Your batteries are LITHIUM-ION rechargeable batteries. Certain Local, State and Federal laws prohibit disposal of these batteries in ordinary trash. • Consult your local waste authorities for your disposal/recycling options. • More information regarding battery disposal in U.S. and Canada is available at; http://www.rbrc.org/index.html, or by calling 1-800-822-8837 (1-800-8BATTERY).
OPERATION WARNING: To reduce the risk of serious personal injuries, read and follow all important safety warning and instructions before using this tool. WARNING: Always be sure that the tool is switched off before insertion or removal of the battery pack. INSTALLING OR REMOVING THE BATTERY PACK (FIG 2) •...
TRIGGER SWITCH ACTION • Turn the drill on by depressing the trigger switch (4-FIG 1). • Depressing the switch further will produce more speed and torque. • Use the Reversing Switch (5-FIG 1) to change the direction of rotation of the drill. •...
Page 10
NOTE: Always make sure that bits are seated firmly between the chuck jaws. Never attempt to operate a bit that is wobbly, unstable, or broken. • To remove bits, place the reversing switch in the Off (middle) position. Loosen the chuck jaws by rotating the chuck body counter-clockwise.
MAINTENANCE CLEANING Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean clothes to remove dirt, dust, oil, grease, etc. WARNING: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts.
Page 12
DIAGRAM AND PARTS LIST NO.
Description
Qty
NO.
Description
Qty
Chuck screw Screw ST2.9x16 Keyless chuck Rear cover ring Front cover of torque ring Hex screw M4 Back cover of torque ring Carrying strap Torque ring...
TWO-YEAR WARRANTY This product is warranted free from defects in material and workmanship for 2 years after date of purchase. This limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is covered by this warranty and it is not transferable. Prior to returning your tool to store location of purchase, please call Toll-Free Help Line for possible solutions.