Ironton 46179 Owner's Manual
  1. Manuals
  2. Brands
  3. Ironton Manuals
  4. Drill
  5. 46179
  6. Owner's manual
Ironton 46179 Owner's Manual

Ironton 46179 Owner's Manual

3/8in. close quarter drill
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
3 / 8 I N . C L O S E Q U A R T E R D R I L L
OWNER'S MANUAL
WARNING:
Read carefully and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating. Failure to follow the safety rules and other
basic safety precautions may result in serious personal injury.
Item# 46179

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 46179 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ironton 46179

Summary of Contents for Ironton 46179

  • Page 1 3 / 8 I N . C L O S E Q U A R T E R D R I L L OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item# 46179...

  • Page 2: Intended Use

    Thank you very much for choosing an IRONTON product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it.

  • Page 3: Electrical Safety

    • Inspect work area for hazards before using tool. • Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. ELECTRICAL SAFETY • Power tool plugs must match the outlet. Never modify the plug in any way. Double insulated tools are equipped with a polarized plug (one blade is wider than the other).
  • Page 4 • Remove any adjusting keys or wrenches before turning the power tool on. A wrench or key that is left attached to a rotating part of the tool may result in personal injury. • Do not overreach. Maintain proper footing and balance at all times. Loss of balance can cause an injury in an unexpected situation.

  • Page 5: Extension Cords

    • Feed the work piece in the correct direction and speed. Feed the work piece into a blade, cutter, or abrasive surface against the direction of the cutting tool’s direction of rotation only. Incorrectly feeding the work piece in the same direction may cause the work piece to be thrown out at high speed.
  • Page 6 Guidelines for Using Extension Cords • If you are using an extension cord outdoors, be sure it is marked with the suffix “W-A” (“W” in Canada) to indicate that it is acceptable for outdoor use. • Be sure your extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified person before using it.
  • Page 7 Always check that the material being drilled is secure and clamped in place if • necessary to prevent any movement. An unstable work piece can cause the drill bit to bind, causing of control and injury. Never hold the work piece in your hand, lap or against other parts of the body when •...

  • Page 8: Unpacking And Contents

    FIG 1 KNOWING YOUR CLOSE QUARTER DRILL (FIG 1) 1. Chuck 4. Lock-On Button 2. Reversing Switch 5. Power-On Indicator 3. ON/OFF Trigger Switch 6. Brush Cap UNPACKING AND CONTENTS IMPORTANT: Due to modern mass production techniques, it is unlikely the tool is faulty or that a part is missing.

  • Page 9: Lock-On Button

    TRIGGER SWITCH ACTION WARNING: Before plugging in the tool, always check to see that the tool is switched off. Your tool is equipped with a variable speed trigger switch. The tool speed is controlled by the amount of pressure you apply to the switch trigger. •...
  • Page 10 • Center the bit in the jaws and hand tighten the jaws by rotating the chuck collar clockwise, being sure the bit is properly aligned in the chuck jaws. • Insert the chuck key into one of three holes in the chuck, turning the chuck key clockwise to securely tighten the chuck.

  • Page 11: Drilling In Metal

    • Apply downward pressure and slowly depress the switch trigger. • When using a twist drill, withdraw the bit from the hole frequently to clear built-up wood chips from the flutes. Clearing the flutes avoids overheating the bit and burning the wood. •...
  • Page 12 abrasive to bearings, brushes, commutators, etc. Consequently, we do not recommend using this tool for extended work on these types of materials. However, if you do work with any of these materials, it is extremely important to clean the tool using compressed air. LUBRICATION This tool is permanently lubricated at the factory and requires no additional lubrication.
  • Page 13 Part# Description Qty Part# Description Screw M5x20 Bearing 608 Spring washer Elastic circlip10 Chuck Armature (120V) Screw M4X14 Stator (120V) Spring washer Gear housing Lug 2.8 Bearing elastic circlip Switch Bearing 6002 Switch rod Spindle Power-on indicator Non-standard pin 4X12 Lampshade Gear Z4 Left name plate holder...

  • Page 14: Two Year Warranty

    TWO-YEAR WARRANTY This product is warranted free from defects in material and workmanship for 2 years after date of purchase. This limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is covered by this warranty and it is not transferable. Prior to returning your tool to store location of purchase, please call our Toll-Free Help Line for possible solutions.

Table of Contents