Subscribe to Our Youtube Channel
Related Manuals for Ironton 46125
Summary of Contents for Ironton 46125
- Page 1 HAMMER DRILL OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item# 46125...
-
Page 2: Intended Use
For technical questions please call 1-800-222-5381. INTENDED USE: Your Ironton Hammer Drill has been designed for drilling timber and metal utilizing a normal drilling action and into masonry using hammer action. TECHNICAL SPECIFICATIONS: Input current: 4.5A... -
Page 3: Important Safety Considerations
IMPORTANT SAFETY CONSIDERATIONS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your corded power tool. - Page 4 f. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
- Page 5 Otherwise, the counterforces produced during use or the jamming of a drill bit can cause inaccuracies or put the drill out of control. • Before drilling into walls, ceilings etc, ensure that there are no concealed power cables or pipes in the cavity. Always use the auxiliary handle.
-
Page 6: Operation
Attaching the auxiliary handle 1. The auxiliary handle provides additional control, support and guidance for the drill. 2. The auxiliary handle can be set to any position around the 360ºhandle collar mount. 3. Loosen the auxiliary handle grip by rotating it anti-clockwise to the handle collar. 4. - Page 7 On/off switch 1. Turn the drill on by depressing the trigger switch. To turn the tool off, release the trigger switch. Fig D 2. The tool can be locked on by first depressing the trigger switch and then pressing the lock-on button.
- Page 8 Removing a bit 1. Disconnect the drill from the power supply. 2. Use the chuck key to loosen the chuck. 3. Remove the bit. Note: Use gloves to handle drill bits and other sharp accessories. Also be aware that drill bits can be very hot after even a short period of use.
-
Page 9: Maintenance
MAINTENANCE • Maintain your Hammer Drill. It is recommended that the general condition of any Hammer Drill be examined before it is used. Keep your Hammer Drill in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel. - Page 10 For replacement parts and technical questions, please call 1-800-222-5381. Page of 11...
- Page 11 WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • lead from lead-based paints, •...
Need help?
Do you have a question about the 46125 and is the answer not in the manual?
Questions and answers