Dnr; Active Contrast; Reset; Audio - Sharp LC-40A1H Operator's Manual

Watching TV
Normal Zoom 14:9
Cinema 14:9 Cinema 16:9
NOTE
• Some picture sizes may not be displayable depending on
the input signal.
• "Zoom 14:9" and "Cinema 14:9" are only available for the
DTV or ATV mode.

DNR

Reduce noise on screen and produces a clearer video.
In the "Menu", press a / b to select "Video",
1
and then press ENTER.
Press a / b to select "DNR".
2
Press c / d to select "Auto", "High", "Low" or
3
"Off".

Active contrast

Automatically adjust the contrast of an image
according to the scene.
In the "Menu", press a / b to select "Video",
1
and then press ENTER.
Press a / b to select "Active contrast".
2
Press c / d to select "On" or "Off".
3

Reset

Reset all picture adjustment items to the factory preset.
In the "Menu", press a / b to select "Video",
1
and then press ENTER.
Press a / b to select "Reset".
2
Press c / d to select "Yes" or "No", and then
3
press ENTER.
20

Audio

Panorama
Set the audio as you desired .
Full

AV mode

Please see page 19.

Auto volume

Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. The automatic volume control
(Auto volume) reduces this problem by equalizing
levels.
1
2
3

Bass/Treble/Balance

You can adjust the audio of the selected AV mode.
1
2
3
Selected item
Treble
Bass
Balance
NOTE
• They cannot be changed during "DYNAMIC (Fixed)" mode.
In the "Menu", press a / b to select "Audio",
and then press ENTER.
Press a / b to select "Auto volume".
Press c / d to select "On" or "Off".
In the "Menu", press a / b to select "Audio",
and then press ENTER.
Press a / b to select the desired menu item.
Press c / d to adjust the item.
c button
For weaker treble
For weaker bass
Decrease audio
from the right
speaker
d button
For stronger treble
For stronger bass
Decrease audio
from the left speaker