Before Turning On The Power - Sharp LC-40A1H Operator's Manual

Preparation

Before turning on the power

Notes on installing the TV
• Avoid direct sunlight and place the TV in a well-ventilated location.
• Place the TV in a level location.
• Do not turn on the power of the TV before connecting the AC cord.
• If there are any protective plastic sheets on the TV cabinet, please take them off before connecting.
Connecting the antenna cable
1
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of
connections that are used for coaxial cable.
Connecting external devices
2
See page 13 for connecting external equipment, such as a VCR and DVD player.
Plug the AC cord in to the AC outlet.
3
AC outlet
• Place the TV close to the AC outlet, and keep the power plug within reach.
• Disconnect the AC cord from the AC outlet if the TV will not be used for a long period of time.
Bundling the cables
4
As the picture illustrated, insert the cable clip into the hole on the TV, and put the cable into the cable clip
for banding.
CAUTION
• To prevent risk of electric shock , do not touch un-insulated parts of any cables with the AC cord connected.
12
Antenna cable
(commercially available)
To antenna terminal
TV (rear view)
AC cord
Standard
DIN45325 plug
(IEC169-2)
75-ohm coaxial
cable (round cable)
Room antenna terminal
(75-ohm type)