[Ext.flash]; Using An Optional Flash - Panasonic Lumix DMC-FZ50 Operating Instructions Manual

• The full range of the zoom can be used
when using the close-up lens.
• Digital zoom cannot be used when using a
wide conversion lens.
• When there is dirt (water, oil, and
fingerprints, etc.) on the surface of the
lens, the image may be affected. Lightly
wipe the surface of the lens with a soft,
dry cloth before and after taking pictures.
• Ensure that [CONVERSION] is set to
[OFF] when not using a conversion lens or
close up lens.
• When using the conversion lens or
close-up lens:
– If you set [CONVERSION] to [OFF], the
performance of the conversion lens or
close-up lens will not be optimal.
• When using the tele conversion lens:
–We recommend using a tripod.
– The stabilizer function may not work
sufficiently.
– The focus indication may light due to the
jitter even if the subject is not focused.
– The time required for focusing may
become longer than usual.
• If you set [CONVERSION] to [
[ ], you cannot use the built-in flash or
C
AF assist lamp. (P91)
• Read the operating instructions of the
conversion lens for details.

[EXT.FLASH]

Using an optional flash

Press [
menu and select the item to set. (P82)
After attaching the external flash, the
effective range will be increased when
compared to the camera's built in flash.
∫ Using the dedicated flash
(DMW-FL500/DMW-FL360; optional)
1 Attach the dedicated flash to the
hot shoe A and then turn on the
camera and the dedicated flash.
], [ ] or
• Be sure to firmly secure to dedicated
flash with the lock ring B.
2 Press 1[ ].
3 Press 3/4 to switch the flash
settings and then press
[MENU/SET].
MENU
] to display the [REC] mode
SET
FLASH
FORCED FLASH ON
FORCED OFF
MENU
SELECT SET
Menu Settings
MENU
SET
99
VQT0X92