Single Picture - Panasonic Lumix DMC-FZ50 Operating Instructions Manual

Connecting to other equipment

∫ Single picture

1 Press 3 to select
[SINGLE PICTURE] and then
press [MENU/SET].
PictBridge
SINGLE PICTURE
DPOF PICTURE
SELECT
2 Press 2 1 to select the picture
and then press 4.
PictBridge
PLEASE SELECT
THE PICTURE TO PRINT
SELECT
PRINT
• The message disappears in about
2 seconds.
3 Press 3 to select [PRINT START]
and then press [MENU/SET].
SINGLE PICTURE
PRINT START
PRINT WITH DATE
NUM. OF PRINTS
PAPER SIZE
PAGE LAYOUT
CANCEL
• Press [MENU/SET] to cancel printing.
4 Disconnect the USB connection
cable after printing.
∫ Setting date printing, the number of
prints, the paper size and the page
layout
Select and set each item in step
• Items not supported by the printer are
displayed in gray and cannot be selected.
116
VQT0X92
MENU
SET
MENU
SET
100 _ 0001
1/3
EXIT MENU
1 OFF
MENU
SET
MENU
SELECT EXIT
3
.
• When you want to print pictures in a paper
size or a layout which is not supported by
the camera, set [PAPER SIZE] or
[PAGE LAYOUT] to [
paper size or the layout on the printer. (For
details, refer to the operating instructions
of the printer.)
• [PRINT WITH DATE]
Settings on the printer are
prioritized.
[OFF] Date is not printed.
[ON] Date is printed.
• If the printer does not support date
printing, the date cannot be printed on the
picture.
• [NUM. OF PRINTS]
Set the number of prints.
• [PAPER SIZE]
(Paper sizes that can be set with this unit)
The paper sizes are displayed on pages
1/2 and 2/2. Press 4 to select.
1/2
Settings on the printer are
prioritized.
89 mm k 127 mm
[L/3.5qk5q]
[2L/5q k 7q] 127 mm k 178 mm
[POSTCARD] 100 mm k 148 mm
210 mm k 297 mm
[A4]
¢
2/2
54 mm k 85.6 mm
[CARD SIZE]
[10 k 15cm] 100 mm k 150 mm
[4q k 6q] 101.6 mm k 152.4 mm
[8q k 10q] 203.2 mm k 254 mm
216 mm k 279.4 mm
[LETTER]
¢These items cannot be displayed when
the printer does not support the paper
sizes.
• [PAGE LAYOUT]
(Layouts for printing that can be set with
this unit)
] and then set the